6
INSTALLATION AND SET UP
Once the Internet connection has been configured, we will
place the printing bed correctly in order to calibrate our
3D printer.
Connect the printer to the network in two steps:
1. Use a computer to connect to the Wifi of your printer with the
password “tumakerLS”.
2. Once connected, open a browser and type 192.168.12.1
WIFI
1. If you want to connect via WiFi, choose the WiFi network to
which you want to connect.
2. Enter the network password
3. Add IP and Gateway
4. Click on Change
3. Open the Settings tab - Connectivity
4. Connect via Ethernet or WiFi always selecting the STATIC
option
ETHERNET
1. If you opt for the Ethernet option, connect a network
cable.
2. Assign the IP and gateway and click Change
