FIG. 22
Attach the Plastic Shroud Gap Cover (#8) and a Plastic
Shroud Edge Protector (#10) to the edge of the
Weight Shroud (#2).
Next, connect the two Plastic Shroud Edge Protectors (#10) to the
Plastic Shroud Gap Cover (#8) using the two Plastic Connectors
(#68).
2
8
FIG. 23
Align the edge of the
Weight Shroud (#2)
with the grooves
of the Plastic Shroud Gap Cover (#8) and the Plastic Shroud Edge
Protectors (#10).
10
2
FIG. 24
Affix the
Weight Shroud (#2)
to the bottom of the
Weight
Stack Frame (#1)
and at the top of the
Guide Rod Retainer (#4)
us-
ing four Hex Head Cap Screws 1/4-20 X 3/4 (#19), and four Flat
Washers 1/4” (#18).
2
FIG.25
Attach the Plastic Shroud Lid (#9) to
Guide Rod Retainer
(#5)
, in the position as shown above, and secure it into place using
two Flat Head Socket Cap Screw 3/8-16 X 3 (#23).
9
2
2
8
Owner’s Manual: Assembly Instructions
SP-405 Pectoral Contractor
10
68
68
10
10
