Page 22
Step 185:
Use a piece of 5/16” sq stick as a
spacer and glue the 5/8” stick as shown
Step 184:
Cut a 5/8” piece of balsa to fit as
shown
Step 183:
Sand the balsa even with the
foam as shown.
Step 182:
Glue the stick in place
Step 181:
Refer to the full size plans to
locate the 5/16” stick and cut as shown.
The horizontal
stab will sit
directly to the
rear of this
piece
Do NOT glue the 5/16”
stick!
Press foam together
against spacer while
gluing balsa stick at
rear
Step 186:
Using the full sized plans, fit and
cut the front fuse pieces and place as shown
Step 187:
Using 3 scraps of 1/32” ply, cut
to fit between pine beams
Step 190:
Insert the foam block and glue to
the pine beam and balsa
Step 188:
Place the spacers as shown
between front and rear balsa sticks
Step 189:
Carefully glue the balsa stick to
the pine (but not to the spacers)
