Tuff stuff MSL-IV Assembly & Instruction Manual Download Page 17

Page: 17 / 24

FIG. 57

Next, route the

Leg Extension Cable (#15)

through

the

Offset Pulley Bracket (#23)

, as shown above. Refer to

Fig. I

on page 17 for further detailed illustration of this cable

routing.

FIG. 58

Finally, route the remainder of the

Leg Extension

Cable (#15)

through the Nylon Pulley 4 1/2 Rd. (#35) located

on the

Rear Upright (#4)

. Then, assemble the Strap Bracket

(#83) and the Abdominal Strap (#53) onto the cable -end of the

Leg Extension Cable (#15)

. Secure this assembly using one

Shoulder Bolt 3/8 X 3/4 (#80), one Nylon Ball 1 3/4 X 5/16
(#85) and one Nylon Insert Lock Nut 5/16-18 (#84). Refer to

Fig. D

on page 18 for further detailed illustration of this

assembly.

FIG. 59

Insert the end of the

Low Row Cable (#17)

into the

Low Row Swivel Pulley Bracket (#40)

and secure it into

place using one Nylon Pulley 4 1/2 Rd. (#35). Use the pulley
mounting hardware described in

Fig. 55

on page 15 to fasten

the pulley and cable into place.

FIG. 60

Insert a Nylon Pulley 4 1/2 Rd. (#35) and the

Low

Row Cable (#17)

, as shown above. Use the pulley mounting

hardware described in

Fig. 55

on page 15 to fasten the pulley

into place.

Owners’ Manual: Assembly Instructions

MSL-IV Muscle IV Home Gym

Summary of Contents for MSL-IV

























Search results

Summary of Contents for MSL-IV

Reviews:

Related manuals for MSL-IV

Brands by name

Popular brands

Tuff stuff MSL-IV, Assembly & Instruction Manual

Search results

Summary of Contents for MSL-IV

Reviews:

Related manuals for MSL-IV

Brands by name

Popular brands