Operation
34
Control lever L2 (option)
The hydraulic circuit L2 from the accessory equipment is activated
with the control lever L2 (1).
Do not move the lever jerkily.
1. Press the lever (1) outwards in position "II".
The hydraulic oil flows thorough the accessory equipment as
long as you press the lever.
2. Press the lever (1) inwards in position "I".
The hydraulic oil flows in the opposite direction through the
accessory equipment as long as you press the lever.
The hydraulic circuit does not have a lag protection i. e. in position
"0" the oil does not flow back, e.g. for inclination of a snow plough
blade or a road sweeper.
000024
1
Control lever L3
The hydraulic circuit L3 from the accessory equipment is activated
with the control lever L3 (1).
Do not move the lever jerkily.
1. Press the lever (1) outwards over the notch in position "II+".
The lever stays in the indexed position. The flow line of the
hydraulic circuit is free and the hydraulic oil flows through the
accessory equipment (e.g. for the operation of a road
sweeper).
If the lever is not pressed outwards until the indexed position,
it goes back to the "0" position automatically.
2. Press the lever (1) inwards in position "I".
The hydraulic oil flows in the opposite direction through the
accessory equipment. The position does not have a locking
function.
000025
1
