Safety
20
Safety measures during maintenance
Personnel
You may only perform service or repair work on the machine if
you are a qualified specialist or if you have been carefully briefed
about the work to be performed by a qualified specialist.
Before performing maintenance work
Before performing the maintenance work, read and observe the
operating manual and the safety instruction in particular.
If maintenance work is being performed on the machine, the
engine may not be started and operating elements as well may
not be activated without prior consultation. This leads to accidents
with severe injuries.
Tools
Use appropriate tools only. The use of damaged, poor quality,
faulty or makeshift tools will cause injuries.
Safety-relevant parts
The parts are subject to a normal wear and must be replaced at
regular intervals even if they are not yet defective.
Safety-relevant parts are:
Fuel system:
– Fuel hose, overflow hose and tank cap
Hydraulic system:
– All hydraulic hoses
Protective grating:
– Fan, ...
Defective parts must be replaced immediately even if the
specified time has not yet expired. Hydraulic hoses must be
replaced after 6 years including a storage time of max. 2 years.
Before performing the inspection and maintenance
Accessory equipment must be removed before the maintenance.
Park the machine on solid and level ground.
Turn off the engine and activate the holding brake. Remove the
ignition key and keep it in safe custody.
