
04
05
■
Meaning of the Symbols
• Device Label
WARNING
• The blister can be cleaned with 30˚
C±5
˚C tap
water or 60% to 70% alcohol,
non-high-temperature cleaning.
• The blister can be used repeatedly, but
should be changed once broken.
FLAMMABLE
• Spray cans will explode if they get too hot.
• Do not expose the spray cans to heat.
• Only use approved spray can.
*
PREVENT EXPLOSION AND
IGNITION OF SPRAY CANS!
• Appearing on the device
Observe operator’s manual
Date of manufacture
Disposal information, see
important information “ Disposal”
Serial Number
Warning
Flammable
SN
■
Product Description
Used to maintain optimum performance and prolong working life of dental handpieces.
Delivers oil and air automatically to handpiece.
Used after dental treatment and before autoclaving.
■
Disposal
The wastes incurred are to be recycled or disposed of in a way that is harmless for human beings
and the environment; in doing so, the national valid regulations are to be observed.
Disposal of equipment and accessories at the end of their service lives:
On the basis of EC Directive 2002/96/EC on Waste Electrical and Electronic Equipment, we would
like to point out that this product is currently in compliance with the labelling requirements but is not
yet subject to the disposal requirements of this Directive. However, the unit may be disposed of in
Europe in special waste management centers. Additional information can be obtained from the
manufacturer or your dental supplier.
Automatic Handpiece
M
aintenance Unit
Product code :
08090012XXX
XXXXXXXXXXX
SN
INPUT :AC 100~240V 50/60 Hz
60VA max.
AIR PRESSURE: 4~6 bar
FUSE: 250V 2A Slow Blow Type
YYYY-MM
IP20
Protection category
Dust-proof; water-proof
Eye protection must be worn
• Appearing on the packaging
Fragile
Keep dry
Transport upright
Air pressure
Humidity
Quantity
Manufacturer
Stacking restrictions
Temperature range
■
Main Switch
OFF
ON
• Carton Label
20 kg
95%
5%
%
700
1060
hPa
hPa
70 C
-20 C
0473
Temperature range
Air Pressure
Humidity
Fragile
Keep dry
Transport
upright
Stacking
restriction
Waste
Disposal
Storage and transport requirements
1
Automatic Handpiece
Maintenance Unit
Product Code:
08090012
XXXXXXXXXXX
SN
En
glish