background image

 

 

7 Battery maintenance 

8.1 Transportation 

Lithium batteries are dangerous goods. Passed the test of UN38.3, this product meets 

the transportation requirements for dangerous goods for lithium batteries. After the 

installation of the battery on site, the original packaging (contains the lithium battery 

identification) should be kept. When the battery needs to be returned to the factory for 

repair, please pack the battery with the original packaging to reduce unnecessary trouble. 

8.2 Storage 

After purchasing the battery, please store it with following instructions: 

1)  Please store it in a dry and ventilated environment, keep it away from heat 

sources; 

2)  Please keep it in an environment with storage temperature as -20 ° C ~ 50 ° C, 

humidity <85% RH; 

3)  For long-term storage (>3 months), please put it in an environment with a 

temperature of 18 ° C to 28 ° C and a humidity of < 85% RH; 

4)  The battery should be stored in accordance with the storage requirements 

mentioned above, and the battery should be installed within 6 months since 

delivered from the factory and used with compatible inverters; 

 

The battery cannot be disposed of as household refuse. When the service life of the 

battery reaches to the limit, it is not required to return it to the dealer or TSUNESS, but it 

must be recycled to the special waste lithium battery recycling station in the area. 

 

 

 

 

Note

 

The battery remains 60% power when it is sent from the factory. 

The longer the battery is stored, the DOD value is getting bigger. When 

the battery remaining voltage fails to reach the startup voltage 

requirement, the battery may be damaged. 

Judgment condition: Close the battery breaker switch and press the 

BMS switch. At this time, if the LED light is flashing, it is running 

normal. If the LED light is off, the battery is in faulty. 

Summary of Contents for TSOL-B100E-S



















Reviews: