2.2 Explanation of Symbols
This section gives an explanation of all the symbols shown on the inverter and on the
type label.
CE mark.
The inverter complies with the requirements of the applicable CE guild
lines.
Dangerous electrical voltage
The device is directly connected to public grid, thus all work to the battery
shall only be carried out by qualified personnel.
No open flames
Do not place or install near flammable or explosive materials.
Attention
Install the product out of reach of children
Danger of hot surface
The components inside the device will release a lot of heat during
operation. Do not touch metal plate housing of the inverter during
operating.
Danger.
Risk of electric shock!
An error occurred
Read the usage manual to troubleshoot problems
This device SHALL NOT be disposed of in residential waste
Please go to Chapter Seven “Battery maintenance” for proper
treatment.
Recyclable
2.3 Emergency situation
Despite of its careful and professional protection design against any hazard results,
damage of the battery may still occur. If a small amount of battery electrolyte is released
due to a serious damage of the outer casing; or if the battery explodes due to not being
treated timely after a fire breaks out nearby, and leaks out poisonous gases such as
carbon monoxide, carbon dioxide and etc., the following actions are recommended:
1) Eye contact: Rinse eyes with a large amount of running water and seek medical
advice
2) Contact with skin: Wash the contacted area with soap thoroughly and seek medical
advice
3) Inhalation: If you feel discomfort, dizziness or vomiting, seek medical advice
immediately.
Summary of Contents for TSOL-B100E-S
Page 1: ...31 TSOL B100E S...
Page 11: ...Fix the brackets in the marked position with hex screws...
Page 18: ......