19
TST-Doc-507 WSD-M Manual-(
C
)
• How do I remove an unwanted tire icon from the
monitor?
1. To delete a single sensor code:
2. Press the “SET” button until it beeps (approx. 3
seconds). Push the (+) button and scroll through the
parameters until “LEARN ID” appears. Press and release
the “SET” button. Use the (+) or (-) buttons to scroll to
the tire you wish to remove. Press the “Set” button to
select that tire. It will start flashing. Press the “Back”
button for 3 seconds. You will hear 3 beeps. The code
will change to “FFF FFF” which will be flashing. Press
“SET” once. The flashing will stop and the ID code will
be deleted.
Note: To delete all of the tire codes: Press the “BACK” button for
6 seconds. You will hear 6 beeps. “DEL ALL” will appear on the
screen. Press “SET” once. You will hear one beep. “FFF FFF” will
appear. All ID codes are deleted.
DISPLAY SPECIFICATIONS
Temperature Operating Range
-4° F – 176° F / -20° C –
80° C
Storage Temperature Range
-22° F – 185° F / -30° C
– 85° C
Charger Input Voltage
5v – 30v DC
Frequency
433.92 MHz
Size
4.6” Length x 2.99”
Width x 1.06” Depth
117mm Length x 76mm
Width x 27mm Depth
Weight
4.4 oz / 125 grams
