9
TST-Doc-507 WSD-M Manual-(
C
)
the screen, blinking. Press the “SET” button again and then use
the (+) button to select
°
F
or
°
C. Press “SET” again to select it.
Press “BACK” to go back to the Main Screen.
HIGH TEMPERATURE ALARM SETTINGS
To set the High Temperature Alarm, press the “SET” button until it
beeps. Press the (+) button twice and “HI TEMP SET” will appear.
Again, press the “SET” button to enter that mode. Use the (+) or
(-) buttons to adjust the High Temperature parameter, if desired.
Press “SET” to save. When done Press the “BACK” button.
NOTE: We recommend leaving this temperature setting at the
default 158
°
for all types of tires.
HIGH PRESSURE ALARM SETTING
To set up the High-pressure Alarm, press the “SET” button until
it beeps. “HI PRESSURE SET” will appear at the bottom of the
screen. Again, press the “SET” button to enter that mode. Press
the “GO” button to select the appropriate axle. Use the (+) or
(-) buttons to adjust the high-pressure alarm 20-25% over your
