10
normal tire pressure for that axle. Press the “GO” button to move
to the next axle. When done setting each axle that you have
sensors on, press the “SET” button to leave that parameter and
go back to the menu. When done, press the “BACK” button to go
to the Main Screen.
When you get to the Trailer Section of the display, all the tires will
flash. You can now set all the trailer axle high pressures as one
group.
LOW PRESSURE ALARM SETTING
To set up the Low-pressure Alarm, press the “SET” button until it
beeps. Press the (+) button once and “LOW PRESSURE SET” will
appear. Again, press the “SET” button to enter that mode. Press
the “GO” Button to select the appropriate axle. Use the (+) or (-)
buttons to adjust the low-pressure alarm 10% below your normal
tire pressure for that axle. Press the “GO” button to move to the
next axle. When done setting each axle that you have sensors
on, press the “SET” button to leave that parameter and go back
to the menu. When done, press the “BACK” button to go to the
Main Screen.
When you get to the Trailer Section of the display, all the tires
will flash. You can now set all the trailer axle low pressures as one
group.
NOTE: If your tire pressure is below 100 lbs., you must set the
TST-Doc-507 WSD-M Manual-(
C
)
TST-Doc-507 WSD-M Manual-(
C
)
