Page
36
of
41
Understanding Dante/AES67 Ports
Both PAM1-IP-3G and PAM2-IP-3G Primary and Secondary 1Gig/E ports are set to default to DHCP. If no
DHCP server is present, the ports will auto-assign an IP address.
When auto-assigning IP addresses, the Primary and Secondary ports will adopt an IP address in the
following ranges:
Primary Port
169.254.x.x
Secondary Port
172.31.x.x
In cases where no DHCP server is present, both the Primary and Secondary Ports will continue to search
for DHCP.
Using Dante Controller, it is also possible to assign a static IP address to the Primary and Secondary
Dante/AES67 ports if required.
Note:
It is not possible to either set or discover the IP addresses of the Primary and/or Secondary Dante/AES67 ports using the front panel
controls on the PAM1-IP-3G or PAM2-IP-3G. TSL Products recommends that customers use Dante Controller for this purpose. More
information on how to use Dante Controller can be found on the Audinate Website at the following link:
https://audinate.com/resources/technical-documentation
Using the ‘Device Info’
tab in Dante Controller, it is possible to see the IP addresses currently in use by the
Primary and Secondary Dante/AES67 ports on the PAM1-IP-3G or PAM2-IP-3G.
The example below shows a PAM2-IP-3G being identified on the network (see PAM-IP under the Product
Type Column) using an IP
address of 192.168.204.103
on the Primary port.
In
this
example,
the
Secondary port is not
connected.
The ‘Device Name’ column
shows the current user
assignable name given to
the PAM2-IP-3G.
Double clicking on the
device in the Device Info
window will result in the
‘Device View’ the pop
-up
window being shown:
