Page
26
of
41
Loading a Preset from the front panel
8.
From the
SVIP Main Menu
, navigate to
Stream
Config.
9.
Push the rotary encoder to enter the
Stream Config
Menu
10.
SFP1 Module: -
The PAM2-IP-3G displays both the
type (e.g. 2110 or 2022-6) and the firmware version
number of the SFP Module currently inserted into SFP
Slot 1 of the PAM2-IP-3G. If no valid module is present,
the message ‘pending…’
will be displayed.
11.
SFP2 Module: -
The PAM2-IP-3G displays both the
type (e.g. 2110 or 2022-6) and the firmware version
number of the SFP Module currently inserted into SFP
Slot 2 of the PAM2-IP-3G. If no valid module is present,
the message ‘pending…’ w
ill be displayed.
12.
Active SFP: -
The name of the currently active SFP
Module is shown. Use of the TAKE and UNDO buttons
provides manual switching between the Multicast Streams currently being subscribed to by SFP1
and SFP2.
13.
SFP1 Preset: -
The name of the SVIP Preset currently loaded into SFP Module # 1 is shown here.
Any one of the SVIP Presets can be manually selected and applied here using the TAKE option.
Please note, when loading a 2110 Preset into the Active SFP, the 2110 Essences associated with
that preset will be displayed immediately on the front panel of the PAM2-IP-3G.
14.
SFP2 Preset: -
The name of the SVIP Preset currently loaded into SFP Module # 2 is shown here.
Any one of the SVIP Presets can be manually selected and applied here using the TAKE option.
Please note, when loading a 2110 Preset into the Active SFP, the 2110 Essences associated with
that preset will be displayed immediately on the front panel of the PAM2-IP-3G.
15.
Press the red button as shown on Page 8 of this Quick Start Guide to exit the
SVIP Input
Selection
Menu.
SVIP Main Menu
Stream Config
Preset Setup
SVIP is selected as the Input Source
SFP1 Signal OK
–
active SFP
No Module Detected in SFP2
Statistics
Module Setup
SVIP Input Selection
SFP1
Server 1
UNDO
System Idle
UNDO
UNDO
TAKE
TAKE
TAKE
Server 2
Active SFP:
SFP1 Preset:
SFP2 Preset:
SFP1 Module
SFP2 Module
2110d v2.2
pending...
