TSindustrie GM10, Operating Manual

Page: 12 / 80

29/07/2020 12
20. Only trunks up to a certain diameter may be processed in the wood shredder.
The following values apply
:
21. The hydraulic system must be subjected to an expert inspection every year. The hydraulic
hoses are to be replaced after five years
.
22. Do not reach into the supply funnel when filling the wood shredder. Blockages must be dealt
with safely (stop motor, use aids). To push short pieces or branch-like hacking items through,
only use sturdy wooden sticks or other aids made of wood. I will wood shredders are only suita-
ble for manual loading. Do not move around the ejection area.
23. Perform a function test every day before initialisation, especially on the safety equipment
(switch rods, switch locks and off switches on covers of M versions). Hacking blades and counter
blades are also to be tested for function and a tight fit.
24. Operating personnel must be inducted thoroughly before initialisation
.
25. The hacking disc may only be released once it has come to a full standstill and the motor has
been switched off. For work on the hacking disc or on cutting tools, the hacking disc must al-
ways be locked with the supplied hacking disc claw.
26. Danger due to flying parts. Attention must be paid that parts such as wood chips can also fly
out of the funnel in the operating area. Body protection must always be attached (see page 15).
The machine should be operated to the side of the funnel.
GM10M/Z or WS 10-14 SP/PTO up to ø 10 cm
150M or WS 15-27 P up to ø 15 cm
170M/Z up to ø 16 cm
190M/Z or WS 18-35 D or WS 18 D / PTO up to ø 18 cm
250M or WS 18-35 DT or WS 18-35 DT up to ø 18 cm
327Z or WS 20 PTO/ up to ø 20 cm
350ME/MT up to ø 20 cm
431Z or WS 23 PTO/ZS/ZSA up to ø 23 cm
450M up to ø 23 cm
532Z/ZS/ZSA up to ø 26 cm
550M up to ø 26 cm