TSI Instruments PRESSURA 8630-PM, Operation And Service Manual

Page: 30 / 49

INTERFACE MENU
(continued)
MENU ITEM
SOFTWARE
NAME ITEM DESCRIPTION ITEM RANGE
DEFAULT
VALUE
OUTPUT
RANGE
OUTPUT
RANGE
(continued)
The PresSura controller updates the analog output every 0.1
second. This signal outputs a linear 0 to 10 volt direct current
(VDC) or 4 to 20 mA DC analog output which corresponds to
the measured room pressure.
LOW or HIGH HIGH
OUTPUT
SIGNAL
OUTPUT
SIG
The OUTPUT SIG item selects the type of analog pressure
signal output. The analog output signal can either be 0 to 10
VDC or
4 to 20 mA.
0 to 10 VDC or
4 to 20 mA 0 to 10 VDC
ACCESS
CODE ACCESS
CODE
The ACCESS CODE item selects whether an access code
(pass code) is required to enter the menu. The ACCESS CODE
item prevents unauthorized access to a menu. If the ACCESS
CODE is ON a code is required before the menu can be
entered. Conversely if the
ACCESS CODE is OFF no code is
required to enter the menu.
ON or OFF OFF
END OF
MENU The END OF MENU item informs you that the end of a menu
has been reached. You can either scroll back up the menu to
make changes, or press the
SELECT or MENU key to exit out
of the menu.
24
Pa
rt
Two