TSI Instruments FHC50, Operation And Service Manual

Page: 87 / 107

N2 Communications Description of Variables 79
NPT NPA Feature Unit
AO 16 Setback High Flow Alarm Setpoint
cfm or L/s
AO 17 Setback Damper Position Setpoint
%
AO 18 High Sash Position Alarm Setpoint
%
AO 19 Units Value
0: English Units (fpm, cfm)
1: Metric Units (m/s, m
3
/h)
2: Metric Units (m/s, l/s)
BI 1 Low Velocity Alarm Status
0: Inactive
1: Active
BI 2 High Velocity Alarm Status
0: Inactive
1: Active
BI
3 Low Flow Alarm Status
0: Inactive
1: Active
BI 4 High Flow Alarm Status
0: Inactive
1: Active
BI 5 High Sash Position Alarm Status
0: Inactive
1: Active
BI 6 Velocity Sensor Error Status
0: Inactive
1: Active
BI 7 Data Error Status
0: Inactive
1: Active
BI 8 Setback Status
0: Inactive
1: Active
BI 9 Emergency Status
0: Inactive
1: Active
* Not available on standard Model FHC50s.
** The units of the variables are based on the units variable. When the units variable is set to 0 the values are in
English form. When the units variable is set to 1or 2 the units are metric. English is the default units.