2-4
AeroTrak
®
Handheld Airborne Particle Counter
To Use AC Power
1. Connect the AC power adapter to the power cord.
2. Insert the AC power adapter into the side of the Model 9306.
3. Connect the power cord to an outlet.
4. Press the
on/off
button
(located on the front of the instrument
handle).
5. After a splash screen displays the TSI
®
logo, a brief start-up
sequence begins as the Windows
®
CE operating system boots up.
U s i n g w i t h a P r i n t e r
A hard copy of a sample
set can be printed from
the instrument using the
optional TSI
®
Model
700085 thermal printer
(see Chapter 3,
“
”). Only the
TSI
®
Model 700085
printer is compatible with
the Model 9306. The
printer may be used on
its internal battery or an
AC adapter. A custom
communications cable is
included with the printer.
The cable goes between
the USB A port and the
9-pin DSUB on the printer.
Summary of Contents for AEROTRAK 9306
