TSI Incorporated PORTACOUNT PRO+ 8038, Operation And Service Manual

Page: 65 / 107

Operating Modes and User Interface 59
Note
There is a 2
nd
High concentration warning level setting for N95
mode on the PortaCount Pro+ Model 8038.
High
Concentration
Warning Level The high concentration warning notifies
when the ambient air particle concentration
exceeds the target range during Daily
Checks and Fit Tests. Prolonged exposure
to excessive concentration levels could
degrade the performance of the PortaCount
over time, resulting in failed daily checks or
a “Low Particle Message.” By default, the
high concentration warning displays when
the ambient concentration is above 30,000
particles/cm
3
for the Model 8030 or 8038
when testing masks with 99% efficiencies
or greater, or above 1,500 pt/cm
3
for the
Model 8038 when testing masks with <99%
efficiencies. These default values can be
varied from the Global Settings screen to
accommodate environments where particle
concentration is necessarily elevated. To
troubleshoot this warning, refer to
Chapter 6, Service and Maintenance .
Save fit tests to
database By default, fit test result will only be saved
to the flash drive database if the fit test
passes. Use this option to allow saving of
all fit test results including failed fit tests.
When “Save all fit tests” is selected, those
fit tests which are stopped prematurely by
either the user or due to a fault condition
such as low ambient concentration will be
saved to the database.
Automatically
print report for
saved fit tests If this option is enabled, a fit test report will
automatically be printed for each saved fit
test result. Make sure that the printer has
been configured correctly using the Printer
Setup screen before enabling this option.
Refer to
Chapter 5 for more information on
Printer Settings menu.