TSI Incorporated PORTACOUNT PRO+ 8038, Operation And Service Manual

Page: 63 / 107

Operating Modes and User Interface 57
As instructed on the touch screen,
“Carefully press and briefly
hold stylus on the center of the target. Repeat as the target
moves around the screen.
”
When the calibration is complete, you are notified that the
settings have been measured. Press anywhere on the screen to
end the calibration.
Printer Setup
The PortaCount Pro fit tester supports the printing of fit test
reports on printers compatible with the HP PCL3/PCL5e/
PCL3GUI printer languages, including many DeskJet, LaserJet
and DesignJet models. When setting up printing for the first time
it is important to configure the printer setup correctly.
Select the printer type as specified by the printer manufacturer.
The fit test report is designed to print best on letter sized paper or
card-form paper that includes a punch-out fit test card (TSI part
number 803X-CRDFRM). If using the card-form paper, select
Report Format
, “Report with card.”
Use the Top Margin and Left Margin settings to position the fit
test report on the page or position the card text onto the card
form.