TSI Incorporated PORTACOUNT PRO+ 8038, Operation And Service Manual

Page: 61 / 107

Operating Modes and User Interface 55
Button or Field
Name
Description
Mask Purge Time
Use the up/down arrows to set the time (in seconds)
the mask is purged before the Mask sample time.
New Exercise
Name Enter a name for the exercise using the on-screen
keyboard.
Next Test In _
months Number of months before the next fit test is due.
This is typically 12 months, although some
regulations call for 6 or 24 months. Consult the
applicable regulations for additional information.
Valid range from 1 to 99. Use the up/down arrows to
set this field.
N95 (Model 8038
only)
If this protocol will be used for testing masks with <
99% filter efficiencies such as N95, P2, and P1
respirators, check this box.
Protocol Name Enter the name for the exercise protocol you are
creating using the on-screen keyboard.
Mask Sample
Time Use the up/down arrows to set the Mask Sample
Time for the exercise.
Save Saves the current protocol information and adds the
record to the database.
Stop Fit Test
immediately when
any exercise fails If the protocol requires all exercises to pass, check
this box. Most regulations allow an exercise to fail as
long as the overall fit factor passes. Default is
unchecked.
Refer to the regulation or standard that applies to your
industry or hazard for guidance on which exercises should be
performed and how many there should be.
4. Press Save to save the new protocol.
5. Press Exit to close the Protocol database.