20
Model 8710 DP-C
ALC
TM
Micromanometer and Model 8375 A
CCU
B
ALANCE
®
Air Balancing Tool
Delete Sample Data
You can delete data in three ways: 1) delete all Sample data in all Test IDs, 2) delete all Sample data for a
single Test ID, and 3) delete only the last Sample currently stored in a Test ID.
Delete all Sample Data
1.
Press
to display
CHANGE Test ID.
2.
Press
X
until
DELETE appears.
3.
Press
.
The display shows
DELETE ALL.
4.
Press
. The instrument counts down from 3 to 0 and then deletes all Sample data.
Note:
This countdown gives you time to change your mind. If you decide not to delete all samples
after pressing
,
press
ESC before the count reaches 0.
Samples will
not
be deleted.
Delete the Samples Stored in a Single Test ID
1.
Press
to display
CHANGE Test ID.
2.
Press
X
until
DELETE
appears.
3.
Press
.
The display shows
DELETE ALL.
4.
Press
X
. The display shows
DELETE Test ID.
5.
Press
. The display shows the currently selected Test ID.
6.
Use
S
and
T
to display the Test ID whose Samples you want to delete.
7.
Press
. “DELETE” flashes while all Samples for the selected Test ID are deleted.
8.
Repeat steps 6 and 7 to delete other Test IDs.
Delete a Single Sample
1.
Press
to display
CHANGE Test ID.
2.
Press
X
until
DELETE
appears.
3.
Press
.
The display shows
DELETE ALL.
4.
Press
X
. The display shows
DELETE Test ID.
5.
Press
X
. The display shows
DELETE #.
6.
Press
.
The display shows the currently selected Test ID.
7.
Use
S
and
T
to display the Test ID containing the Sample you want to delete.
8.
Press
.
The display shows the last Sample in the Test ID.
9.
Press
. “DELETE” flashes while the last Sample of the selected Test ID is deleted.
10.
Repeat step 9 to delete other Samples in the selected Test ID.
