TSE PTV100/72, Owner'S Manual, Page: 247 / 480

Phone: 608-365-2563 21 Fax: 608-365-2182
The following chart lists all of the complete assembly part
numbers with the prefix of "K". All of the pump drive gear
boxes can be purchased as a complete kit and will come
fully assembled with all of the part numbers as shown
in the above figure including the gears, shown in the
following table to create the desired ratio. Note: Dipstick,
P/N 012309, is not provided in gear box kit, but is required
in all normal mounted installations. It can be installed
either left or right side. The opposite side is plugged with
P/N 012326, expansion plug, provided with dipstick. For
replacement gears with bearings assembled, order gear as
a kit with a "K" number (i.e. To order a 012010 gear with
(2) 012016 bearings, order as K12010).
012236 MAGNETIC DRAIN PLUG
J84 DOWEL PIN (2)
D70 WASHER (16)
D1353 CAP SCREW (16)
SEE NOTE FOR DIPSTICK AND PLUG
012166 FITTING
4400-101 VENT
012016 BEARING (10)
012042 SEAL
A - INPUT GEAR
B - OUTPUT GEAR (4)
012118 INPUT HOUSING
012119 OUTPUT HOUSING
Complete Gear Input Output
Box P/N Ratio Gear A Gear B
K12182 1.53 Inc. 012049 012048
K12181 1.40 Inc. 012013 012007
K12179 1.34 Inc. 012012 012008
K12177 1.23 Inc. 012011 012009
K12175 1:1 012010 012010
K12176 1.23 Dec. 012009 012011
K12178 1.34 Dec. 012008 012012
K12180 1.40 Dec. 012007 012013
4PD08 MODULE PUMP DRIVE