TSE PTV100/72, Owner'S Manual

Page: 250 / 480

Phone: 608-365-2563 24 Fax: 608-365-2182
The following chart lists all of the complete assembly part
numbers with the prefix of "K". All of the pump drive gear
boxes can be purchased as a complete kit and will come
fully assembled with all of the part numbers as shown
in the above figure including the gears, shown in the
following table to create the desired ratio. Note: Dipstick,
P/N 012311, is not provided in gear box kit, but is required
in all normal mounted installations. It can be installed
either left or right side. Two expansion plugs, P/N 012326,
are not provided in gear box kit, but are required in all
inverted installations. For replacement gears with bearings
assembled, order gear as a kit with a "K" number (i.e. To
order a 012052 gear with (2) 012016 bearings, order
as K12052).
SEE NOTE FOR DIPSTICK AND PLUG
012236 MAGNETIC DRAIN PLUG
K38 INVERTED OIL LEVEL PLUG
D70 WASHER (16)
D1353 CAP SCREW (16)
4400-101 VENT
012166 FITTING
012016 BEARING (8)
012042 SEAL
A - INPUT GEAR
B - OUTPUT GEAR (3)
J84 DOWEL PIN (2)
012198 INPUT HOUSING
012199 OUTPUT HOUSING
Complete Gear Input Output
Box P/N Ratio Gear A Gear B
K12250 1.38 Inc. 012056 012011
K12248 1.29 Inc. 012055 012012
K12246 1.21 Inc. 012054 012050
K12244 1:1 012052 012052
K12245 1.21 Dec. 012050 012054
K12247 1.29 Dec. 012012 012055
K12249 1.38 Dec. 012011 012056
3PD10 MODULE PUMP DRIVE