Tryton TS121501, Operating Instruction

Page: 5 / 44

MODEL T S 121501 T S 152501 TS203501
Rated voltage 230 V
Rated frequency 50 Hz
Power consumption 150 W 2 50 W 350 W
No load maximum speed 2950 rpm
Grinding wheel dimensions (max. diameter х thickness x hole diameter) 125 x 16 x 12,7mm 150x20x12,7mm 200 x 20 x16 mm
Grinding wheel granularity 1/2 36/60
No load peripheral speed 19 m/s 2 3 m/s 30,9 m/s
Operation cycle S2 30 min
Equipment Class
Weight 5,2 kg 7,5 kg 11,5 kg
Sound pressure level (LpA) 62,6 dB(A) (measuring tolerance – 3 dB(A) )
Sound power level (LpW) 75,6 dB(A) (measuring tolerance – 3 dB(A) )
I
5
d) Check grinding wheels before each use. Grinding wheels - Touching the abrasive wheel in its unguarded area.
should be properly fixed and should allow for free - Throwing back grinding wheel parts by centrifugal force.
movement. Carry out a no load test run at its maximum
- Throwing back machined object or its fragment.
speed for at least one minute. Do not use damaged or
- Hearing loss if no necessary hearing protection is used.
vibrating grinding wheels. Damaged grinding wheels can break
- Cracking/breaking the grinding wheel.
resulting in serious injuries.
- Harmful dust emission when dry grinding indoors.
e) Children are not allowed to operate the device under any
THE SET INCLUDES:
circumstances.
ź
Bench grinder -1 piece
APPLICATIONS:
ź
Multi-grain grinding wheel - 1 piece
The bench grinder is intended for dry rough and fine grinding of metals,
ź
Fine grinding wheel - 1 piece
plastics and other materials provided appropriate grinding wheel is
ź
Anti-spark guards with fixings -2 pieces
used.
ź
Machined object supports with fixings - 2 pieces
The tool is designed for minor grinding jobs such as: processing and
ź
User's manual - 1 piece
sharpening knives, scissors, drill bits, wood and stone chisels, cold chisels
ź
Warranty card - 1 piece
etc.
CONSTRUCTION:
It is absolutely prohibited to use the tool in other applications.
The bench grinding machine is driven by a single-phase electric motor
The tool is not suitable for long-term heavy duty applications. It
and is a Class I device – wall outlets and extension cables must be
cannot be used for jobs requiring professional tools.
equipped with an earthing conductor/terminal.
Its construction is shown in Fig.
A - C on p. 2 :
Fig. A: 1. Switch (on/off)
2. Butterfly nut
3. Machined object support
4. Grinding wheel
5. Anti-spark guard
6. Anti-spark guard fixing
7. Base mounting holes
Fig. C: 8. Fixing holes
9. Side guard
10. Retaining nut
11. Pressure flange
12. Paper washer
Despite using the tool according to its intended application it is
13. Spindle
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
14. Grinding wheel guard
Each application of the tool not in line with the intended use as specified
below is strictly forbidden and makes the warranty terms null and void.
The manufacturer shall not be held responsible for possible
consequential damage that may arise due to or in connection with such
application.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Application of the tool in accordance with the intended use also refers to
its maintenance, storage, transportation and repairs.
Defective electric tools can be handed over for repairs exclusively to
service workshops appointed by the tool manufacturer. The tools
supplied from electric grid shall be repaired exclusively by authorized
electricians.
SPECIFICATIONS: