Tryton TS121501, Operating Instruction

Page: 7 / 44

7
n
Cleaning
NOTE: Before carrying out any cleaning unplug the machine from the
mains.
To provide safe and efficient operation it is recommended to clean the
tool directly after each use.
Remove any deposits using compressed air.
Clean the grinder housing with clean damp cloth and some soap. Do not
use any cleaning agents and solvents, as they can damage machine
plastic components. Protect machine interior against water penetration.
NOTE:
MANUFACTURER:
PROFIX Ltd.,
34 Marywilska Street,
03-228 Warsaw, POLAND.
PICTOGRAMS:
Explanation of the icons located on the nominal plate and the
information tags
.
PROTECTION OF THE ENVIRONMENT:
The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine).
Hazardous components of electronic
equipment may adversely affect the natural environment
and human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for such equipment are available.
«Always wear safety goggles»
«Wear » hearing protection
«Wear a dust mask»
«Read this instruction before switching on the
power supply and starting the work»
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device
purchased.
This
instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.