Tryton TMC240, Instruction Manual

Page: 6 / 44

6
present the reason to make the guarantee rights null and void.
The tool is designed only for household (DIY) application. Do
never use the tool for applications that need use of professional
equipment. The warranty terms are null and void when the tool
is used at craftsman workshops, for industrial applications or in
similar fields.
The vibration level value given refers to basic application of the tool. If the
tool is used for other applications or with other tools, or if it is not
maintained properly, the vibration level may differ from the values
given. The above-mentioned causes may lead to higher exposure to
vibrations during the whole work time.
One must implement additional safety measures to protect the operators
from exposure to vibrations, such as maintenance of the electric tool and
work tools, assurance of proper hand temperature, or determination of
the sequence of work operations.
The declared total vibrations and declared noise emissions were
measured in accordance with a standard test method and may be used
for tool comparison.
The declared total vibrations and noise emissions can be used in
preliminary exposure assessment.
Warnings:
The vibrations and noise emissions during the actual use of the power
tool may differ from the declared values depending on how the tool is
used and on the type of the workpiece in particular.
Determine safeguards to protect the operator. They should be based on
1. Grinder shoe
the estimated exposure under actual operational conditions (taking into
2. Auxiliary
account all parts of the operating cycle such as when the tool is switched
3.
off or idle except the start time).
4. On/Off trigger
5.
6.
7. grinder
8. Dust container lid
switch
9. Dust container
10. Clamps to fix abrasive paper
11. Dust ejector nozzle
grinder
12. Releasing buttons
13. Dust suction openings
14.
15.
ź
The tool is a device of the second class of electric protection (double
insulation) and is driven with a single-phase motor
.
Any other application not in line with the intended use as specified above
is forbidden and makes the guarantee rights null and void. The
manufacturer shall not be held responsible for consequential
impairments.
The grinder design is shown in Fig.
A . Any unauthorized modifications of
the device carried out by the users themselves release the manufacturer
from any responsibility for failures or harms to humans or environment.
The intended use of the grinder includes also its maintenance, storage,
transportation and repairs.
The grinder can be repaired only by service workshops appointed by the
manufacturer. Any tools supplied from the electric power network can be
repaired exclusively by authorized electricians.
n
Delivery kit
ź
Grinder – 1 pc.
ź
Abrasive paper – 2 shee ts (gr. 80,120)
ź
Perforating tool - 1 pc.
ź
Carbon brushes - 2 pcs .
ź
Warranty card - 1 pc.
ź
Operating Instruction - 1 pc.
n
Device components
The components are numbered according to the graphic images presented
in pages 2
- 3 of this Operating Instruction .
Fig.A
h andle
Speed adjustment knob
PRIOR TO START WORKING :
Handle
Power indicator light
ź
Make sure that parameters of the power voltage correspond to the
Power cord ones of the specified on the rating plate of the device.
ź
Make sure that the On/Of f is in the Off position .
ź
While working with a power cord extension make sure that
parameters of the extension cable and cross-sections of its wires are
Fig.B
sufficient for parameters of the . It is recommended to use
extension cables as short as possible and uncoil them to the full
length.
Fig.C Abrasive sheet
CAUTION: Grin ding operations must be always carried out with use of
Fig.E Perforating tool
personal protection equipment for the upper respiratory tract (dust masks).
Due to health reasons it is also mandatory to use a dust container ( 9 )
TECHNICAL DATA:
or a vacuum cleaner of industrial type as a system for dust extraction.
The suction hose of the vacuum cleaner must be connected directly to
the dust ejector nozzle
( 11 ) (see Fig. B ) .
ź
Extreme caution must be taken while grin ding painted surfaces.
Some paints or varnishes contain hazardous substances, thus the
collected dust must be disposed in the environment-safe manner.
ź
When grind ing operations are carried out on surfaces coated with
paints containing lead components it is mandatory to use dust masks
Rated voltage 230 -240 V
Rated frequency 50 Hz
Rated power 240 W 350 W
Operating speed (rpm) 6000- 6000-12000 11000
Abrasive surface 115x230 mm 90x187 mm
MODEL TMC350 TMC240
Sound pressure level (LpA) , 73 dB(A) dB(A) 79,6
Average level of vibrations for the
both handles to
EN 60745-2-4
2
( K=1,5 m/s ) m easurement tolerance
2 2
m/s 8,255 m/s 1,77
Sound power level (LwA), 84 dB(A) dB(A) 90,6
M easurement tolerance K ,K
pA wA
3 dB(A)
Protection class II /
Length of the power cord m 3
W eight 2,1 kg 1,9 kg