8
© TrynEx International 2013 (REV A) F51302C
Assembly Instructions
C. Position the support
wheel as shown.
D. Push the hex bolt
through and thread on
the nut.
F. Completed.
E. Use two wrenches to
tighten the bolt/nut.
STEP 13
Continued from previous page...
STEP 14
Have another person hold the machine firmly by the handlebars.
STEP 15
Remove the bolts on both sides that hold the Wheel Drive Housing to the Brush Drive Extension.
DO NOT RE-USE THE REMOVED HARDWARE.
STEP 16
Remove the bolts on both sides that hold the Wheel Drive Housing to the Brush Drive Frame. Pull the Brush Drive Frame forward keeping the
frame as level as possible and keeping the frame from scraping the cover.
