Trynex SweepEx SWB-480 Assembly Instructions Manual Download Page 4

4

© TrynEx International 2013 (REV A) F51302C

Safety

Your SWB-480 is manufactured to state-of-the-art technical regulations. Despite this, it is possible that 
operation will result in danger to life and limb for the operator or third parties, impairments to the machine 
and other physical assets.
The machine is intended exclusively for use for brushing operations in property maintenance and snow 
clearance. Examples of intended use are: snow clearing; sidewalk, driveway & parking lot cleaning (with 

multi-purpose brushes); spring debris clean-up; dethatching; clearing debris from artificial turf; and leaf 

clean-up (with Multi-Purpose brushes). Any operation over and above these uses will be considered as a 
non-intended use. SweepEx will not be held liable for any resulting damages. The operator alone is respon-
sible for any risk. Intended Use also includes observance of the Owner’s Manual and keeping to all service 
and maintenance procedures.
Always keep the Owner’s Manual available at the machine’s place of work. In addition to this Owner’s 
Manual, furnish all users with information regarding legal or other important regulations regarding accident 
prevention. These duties can include handling hazardous materials; wearing personal safety equipment; and 

traffic regulations. You should supplement this Owner’s Manual with instructions covering information related 
to use of powered machinery; and operating equipment near people, other machines and traffic.
Do not smoke or have any open flame near the machine. Gasoline vapors could explode.

Only use the machine in perfect condition and according to applicable regulations. Be aware of your sur-
roundings and alert to what you are doing to reduce hazards. You should always repair faults which could 

influence the safety of the machine.

Personnel operating the machine must read the Owner’s Manual before using – especially all safety in-
formation. This includes people who occasionally work on or operate the machine such as for service and 
transport. A clear understanding of how to operate the machine will reduce dangers involved with operating 
powered equipment.
You must check that personnel operating the machine are paying attention to safety and hazards and under 
observance of this Owner’s Manual. Operating personnel may not have long hair, or wear loose clothing or 
jewelry, including rings – these items can catch and be pulled in by moving parts.
Keep all safety and hazard information for the machine complete and in readable condition. If the machine is 
altered with regard to its safety or changes its operational behavior, stop operation immediately and report 
the malfunction to the responsible department or person.
The SWB-480 may only be operated with brushes approved by SweepEx.

Do not carry out any alteration, addition or rebuilding to the machine which could influence its safe opera

-

tion. This especially applies to addition and alteration to safety devices and machine controls, and to welding 
work on load-bearing components.
Personal protection equipment must be worn to prevent accidental injury. Observe all safety and hazard 
information for the machine.

Rotating brushes cause flying debris, wear safety glasses with side protection.

Wear high-visibility clothing, especially when working around other machines, people and vehicles.
Be aware of and avoid pinch points when assembling and operating. Pinch points can exist around levers 
and when putting two parts together (during assembly).

Use barriers and traffic cones when working in areas of pedestrian and vehicle traffic to keep everything at a 

safe distance.

Use genuine SweepEx parts for replacement. These meet the specific technical requirements. Observe all 

deadlines indicated in the Owner’s Manual for maintenance checks and service
Suitable and adequate mechanic’s equipment is required for performing maintenance and service proce-
dures.

The SWB-480 is powered by gasoline. Know the location of fire extinguishers and observe fire safety proce

-

dures.

This page contains safety information to highlight safety hazards and precautions involved with operating your SWB-480. This page must be 
read and understood by all personnel who have any part with the assembly, use and care of this machine.

Summary of Contents for SweepEx SWB-480

















Reviews: