7
© TrynEx International 2013 (REV A) F51302C
Assembly Instructions
STEP 10
Attach the Throttle Lever with bolt, washer and locknut to the handlebars.
STEP 11
(Have someone lift up the rear of the machine by pushing up on the handlebars). Put right and left wheels on the drive axle and secure with
the linch pin. Put the linch pin through the axle only. This is the freewheel position – see Owner’s Manual for more information.
You can now roll the machine out of the box on the rear wheels.
STEP 13
Attach Support Wheel.
Continued on next page...
STEP 12
Support the machine at the front with a wooden block. Secure the rear wheels with chocks.
A. Parts.
B. Push the sleeve
through the wheel.
