13
Insert the TRP-Serial CD, find the ”Serial Server Admin Utility”.
When Installation is completed the wizard creates a Serial Server Admin Utility shortcut on the
Desktop as shown below.
Double Click on the Serial Server Admin Utility then Right click on the main window or go to
Server Manager in Menu Bar and select Search Devices to find the TRP-C34H on the network.
By default all the devices searched are locked and can be seen under the status column of the
Server Manager Window in order to protect from unauthorized configuration changes.
In order to configure the device, it has to be Unlocked first. Unlock password:
trycom
After the device has been Unlocked, the device can be configured for all Network, Serial,
Operating settings. Select the device to be configured, Right Click on the selected device and
click on configure to go to Configuration menu. (Double clicking on selected device can also
open the Configuration menu).
Summary of Contents for TRP-C34H
