21
¾
Hosts on the specific subnet can access the TRP-C34H. Enter “IP
address/255.255.255.0” (e.g., “192.168.2.0/255.255.255.0”).
¾
Any host can access the TRP-C34H. Disable this function by unchecking the
“Enable” Check Box.
Refer the following table for more details about the configuration example.
Allowable Hosts
Input format
Any host
Disable
192.168.2.246 192.168.2.246
/ 255.255.255.255
192.168.2.1 to 192.168.2.254
192.168.2.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254
192.168.0.0 / 255.255.0.0
192.168.2.1 to 192.168.2.128
192.168.2.0 / 255.255.255.128
192.168.2.129 to 192.168.2.254
192.168.2.128 / 255.255.255.128
Auto Warning Page
Auto warning mechanism is a useful mechanism which sends the status messages to E-Mail id’s
and Trap Servers in order to warn or acknowledge the changes made to the TRP-C34H .
On Auto warning page under E-mail and SNMP Trap Setting Tab, click the modify box to activate
the parameter.
a. On Mail server frame, input the IP Address or Domain Name of the Mail server.
b. Input the From E-mail Address.
c. Enter the email addresses in the To E-Mail address boxes (1, 2, 3, 4) to whom the
acknowledgement has to be sent.
d. If the Mail Server has to be authenticated, check the Modify box and check the “Mail Server
authentication check box”, and then press Setup button
Summary of Contents for TRP-C34H
