18
STEP3.
Enter
the COM Port number that TRP-C32S connect using, click “OK”
STEP4.
Press the “
Space bar
” the TRP-C32S firmware setting screen will show.
You can set the TRP-C32S by Console mode.
7-3.Using Telnet
Telnet can be used to configure the TRP-C32S Serial Server from any PC on the LAN. The
Telnet window displays the same configuration information shown in Console Mode and allows
server properties to be configured. See chapter 6 for details on Server Properties.
Ensure the PC and TRP-C32S are connected to the LAN, and the serial server is in RS-232,
RS-422 or RS-485 mode before you can telnet to it and access the configuration screens. From
the
Desktop
, click
Start
, and then
run.
The Run dialogue box will open. Type in Telnet
and the IP
address of the Serial Server
which
to be configured, click
OK
.
