6
Brake functions.
1
2
3
1. In position 1 the rollator is rolling freely.
2. To brake the rollator pull the handle to
position 2.
3. For parking brake push handle down to
position 3.
How to unfold.
(See pictures on page 2!)
1. Rollator standing. Unfold the front wheel frame
by moving the two front legs forward.
2. Let the tray support ring slide into the hook
from backwards.
3. Make sure that the hooklock snaps into place
and locks.
4. Loosen the two adjustment screws. Adjust the
handle and tighten screws.
Brake adjustment.
Congratulations to you for purchasing your new indoor
rollator that will make your life a little easier, more
pleasant and more safe.
To make it easier for you to get familiar with your rollator
it is important that you study this manual.
The rollator helps you to walk and move in-doors. You
can use it as a small sideboard when you are sitting in
a couch or an armchair, or place it in front of you using
it as a small table when you eat or drink your coffee.
Do not forget to activate the parking brake – position
3 on the picture to the right. See picture on page 15
of this manual.
When crossing thresholds, be careful so the items you
have placed on the tray do not fall. Avoid hot liquids
in open vessels.
The tray is designed to carry only light and small
objects like a plate, a coffee-cup, a watering-can etc.
Do not move heavy objects like large boxes, pieces
of furniture etc.
The rollator is not intended to sit on. It is designed only
to carry the tray and the special fabric basket that can
be obtained as accessory. The basket is intended for
light objects like fruit, yarn, a thermos and such.
Maintenance:
Clean the rollator and the tray with
water and a little detergent.
Warranty:
We provide a one year warranty. It does not cover
wear parts like wires and wheels.
Let’sGo Indoor Walker.
Technical data:
Tested according to ISO 11199-2 for a
maximum user weight of 100 kg.
Max. width 54 cm.
Weight 6,5 kg.
Handle height adjustable from
83 to 94 cm.
Tray load max 5 kg.
Basket load max 3 kg.
ENGLISH
A
B
C
1. The brakes are adjusted with the adjustment
screw on the wire (A).
2. Adjustment of the wire tension is done by
turning the adjustment screw (B-C).
Summary of Contents for Let'sGo
