Trust SpaceC@m 300
5
NL
Figure 4: Installation of driver
4. Click on ‘Next’ to start the installation. After the driver has been installed, figure 5 will appear.
Figure 5: Installing the driver
5. Connect the camera’s USB connection
D
(see Figure 1) to a free USB port of your computer. Windows
98 will detect the new hardware and automatically install the Trust SpaceC@m 300 driver program.
6. Now connect the headphones with the microphone to the sound card. For this see the symbol on both
plugs.
You have now completed the installation of the driver program. Continue to chapter 4.2 for the installation of
Ulead Photo Express 3.0 SE.
4.2
Installing Ulead Photo Express 3.0 SE
Ulead Photo Express 3.0 SE is an image editor which you can use to load and edit the images on your
computer that you have taken using the SpaceC@m 300. Follow the instructions below to install Ulead Photo
Express 3.0 SE.
1. In the installation screen, click on 'Install Ulead Photo Express 3.0 SE'. See figure 2. Figure 6 will
appear.