7230 Easy Connect
27
8. Troubleshooting
Tips on proper use of the printer
•
Do not use ‘Print Manager’ or another print buffer to print. In
many cases they may not be compatible with Easy Connect.
Set the printer so you print directly via the printer port. Consult
the printer manual for further details.
•
Do not set your printer to bi-directional or ‘Enhanced
Capabilities Printerport’ (ECP). These positions are not
compatible with Easy Connect and must therefore be switched
off. Consult the printer manual for further details.
•
If your scanner and your printer are still not properly set for
each other after the above tips, use a separate printer port.
You can acquire these from your dealer. Easy Connect can
automatically recognise a maximum of three printer ports.
Naturally you can also choose to connect the scanner only
when you want to use it. Remove the plugs from the printer,
the scanner and the computer from the socket before you
change the cables, otherwise your equipment may become
damaged.
•
It is not necessary to leave the power supply cable of the
scanner plugged in if you want to print via the scanner.
Errors and Solutions
Symptom
Possible cause
Solution
Scan too dark .
Scanner not yet
warmed up.
Let the scanner
warm up for a few
minutes before
scanning.
Monitor too dark.
Change the monitor
brightness.
Summary of Contents for 7230 Easy Connect
