TRUST 632AV LCD POWER VIDEO
7
U K
3.
Press the menu button for a short period. The quality will be set to low. If the
quality was already set to low (small star), the quality will now be set to high
(large star).
If the camera is turned off, it will be set to the high quality again when it is turned
back on.
4.6.4 Video
standard
The TRUST 632AV LCD POWER VIDEO has a video output. The default setting is
for use in Europe (PAL). If you wish to connect the camera to a TV in the USA, set
the output to NTSC.
1.
Make the menu visible using the menu button.
2.
Scroll to the TV symbol (9 in figure 2).
3.
Press the menu button for a short period. The camera will be set to NTSC
and will restart. The image on the LCD screen may flash.
Repeat the procedure to return the camera to the PAL setting. The setting will
remain the same when the camera is turned off. This setting can also affect the
video and webcam image. Leave this option set to the PAL standard if you use the
camera in Europe or other countries which use the PAL standard. The camera
cannot be configured for the French SECAM system.
Tip
:
Video clips can only be recorded in one quality. Therefore, no resolution
or quality can be selected.
4.6.5 Macro
setting
Objects photographed at a distance of less than 2.5 metres are not sharp. Use the
macro setting to make these photographs sharp. This setting works up to a minimum
distance of 40 cm. Objects photographed at a distance greater than 2.5 metres will
not be sharp when the macro setting is selected. Select the macro setting as follows.
Macro setting
1.
Direct the camera towards the object that you wish to photograph.
2.
Rotate the lens ring anticlockwise. You will feel two clicks, one when it exits
the
normal
setting and one when the macro setting is reached. The arrow on
the lens ring will now be pointing at the flower symbol.
Normal setting
1.
Direct the camera towards the object that you wish to photograph.
2.
Rotate the lens ring clockwise. You will feel two clicks, one when it exits the
macro setting and one when the normal setting is reached. The arrow on the
lens ring will now be pointing at the mountain symbol.
Note
:
Do not forget to return the camera to the normal setting after taking
photographs in the macro setting. When in the macro setting, normal
photographs are not sharp. This will be difficult to notice on the LCD
screen or through the viewfinder.
Note
:
The viewfinder may be inaccurate when the macro setting is selected.
Record a slightly large frame to avoid having parts of the object not
being included in the photograph. You can also use the LCD screen,
because this is always more accurate.
