TRUST 632AV LCD POWER VIDEO
6
Tip:
The camera turns off automatically if it is not used for approximately 1
minute.
4.5 Menu
system
See figure 1. Most settings are available on the LCD screen via the menu. Use the
menu as follows.
1.
Turn the camera on (see chapter 4.4).
2.
Press the menu button for a short period. The menu will be displayed. A
short description of the symbols is given in figure 2 and table 5.
3.
Push the menu button downwards to move down items and push the menu
button upwards to move up items.
4.
Press the menu button for a short period to select an item.
Select option 1 (see figure 2) to turn off the symbols.
Tip:
The menu can also be viewed on a TV screen if the camera is connected to
the TV using the AV cable.
4.6 Settings
4.6.1 LCD
screen
The LCD screen can be turned off to save the batteries. The LCD switch is button 18
in figure 1. Slide the button:
-
Upwards to turn the LCD screen on.
-
Downwards to turn the LCD screen off.
4.6.2 Resolution
You can take photographs in three different resolutions using the TRUST 632AV
LCD POWER VIDEO, namely 1600 x 1200, 1280 x 1024 and 640 x 480. The default
resolution when the camera is turned on is 1280 x 1024 (1.3M). Carry out the
following if you wish to set the camera to a higher or lower resolution.
1.
Make the menu visible using the menu button.
2.
Scroll to the resolution symbol (4 in figure 2).
3.
Press the menu button for a short period to change the resolution to a
different resolution. If the camera was already in the highest resolution, the
resolution will be changed to the lowest resolution (see table 7).
L
Low
Resolution is 640 x 480 (VGA).
N
Normal
Resolution is 1280 x 1024 (1.3M pixel).
H
Maximum
Resolution is 1600 x 1200 (2.0M pixel).
Table 7:
Summary of the symbols used on the LCD screen to indicate the
photograph resolution
4.6.3 Quality
You can take photographs in a high and a low quality using the TRUST 632AV LCD
POWER VIDEO. The resolution remains the same, but twice as many photographs
can be saved in the memory by using a higher compression. However, a higher
compression may cause distortion in the image. When the camera is turned on, it is
set to high quality. Carry out the following if you wish to set the camera to the low
quality.
1.
Make the menu visible using the menu button.
2.
Scroll to the quality symbol (5 in figure 2).
