TRUST 610 LCD POWERC@M ZOOM
6
The batteries are full.
The battery capacity is low. Only a few more photographs can be
taken.
Table 6: Battery conditions
4.3
Camera settings when using for the first time
4.3.1
Opening the Set-up menu
See figure 2 on the first page of this instruction manual for this explanation. Most
settings are available on the LCD screen via the set-up menu. Open the menu as
follows.
1.
Turn the camera on using button 3.
2.
Turn the MODE switch (6) clockwise until it can no longer be turned. The
menu on the LCD screen (15) will be visible (see figure 7).
3.
Press the DOWN button (11) or the UP button (10) until the setting you wish
to alter is selected.
4.
Press the EXPOSURE button (7). The submenu for your selection will now
be visible.
5.
If you accidentally select the wrong submenu, press the WB/DELETE button
(13) to return to the main menu.
6.
Follow the on-screen instructions and the instructions given later in this
instruction manual to complete the settings.
7.
Turn the MODE switch (5) to exit the menu.
4.3.2 Language
The menu can be displayed in various different languages. You can alter the
language as required.
1.
Select ‘Language’ from the set-up menu (see 4.3.1). A list of possible
languages will be displayed.
2.
Use the UP and DOWN buttons to scroll through the list until the desired
language is selected. You can choose from English, French, Spanish and
German (other languages may be available in the future).
3.
Press the EXPOSURE button to confirm the selection. The menu will now be
displayed in the selected language.
Comment:
Although the language can be altered, it has been assumed in this
instruction manual that the menu is displayed in English.
4.3.3 Internal
clock
The camera has an internal clock. This clock is used to give the photograph files a
date, so that it can be worked out when the photograph was taken. Although the
clock continues to run when the camera is turned off, it may be necessary to reset
the time if the batteries are replaced. It is not necessary to set the clock in order to
take photographs.
1.
Select ‘Date/Time’ from the set-up menu (see 4.3.1). The date and time will
be displayed.
2.
Use the UP and DOWN buttons until the selected item has been set
correctly. In the 24-hour format, 3 o’clock in the afternoon is 15:00.
3.
Press the EXPOSURE button to go to the next item.
4.
Repeat points 2-3 until all the information is correct.
