Truper 101896, Manual

Page: 3 / 24

Dust, water and lack of oil specific for using in pneumatic tools are the main cause of potential flaws with the
tool. We recommend installing a Brand UNI-LL-1/4 centralized filter-oil feeder system. This system assures
lubrication reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool. Consult the air compressor
instructions
Consider the increase of the line pressure or the inner diameter of the hose to compensate the use of
very long hoses (more than 26 ft). The hose minimum inner diameter shall be 3/8” and the connectors shall be 1/4 NPT.
Use good quality and the right size of couplers and accessories.
Air Hose
3
TPN-883-2
101896
7” x 11”
3”
1984 lb
3.5 CFM
Pneumatic rivet gun
1/4 NPT
3.5 lb
Blind rivet
3/32”, 1/8”, 5/32”, 3/16”
Code
Description
Length and Height
Cylinder Diameter
Traction Force
90 PSI
Rivet Capacity
Work Pressure
Air inlet Connection
Weight with no accessories
Type of Rivet
Air Consumption
76.3 dB
Noise Level
Technical Specifications
Filtering and Lubrication Requirements
UNI-LL-1/4
Centralized
Filter-Oil
Feeder System
Adapter
(not included)
Air
Compressor
CAUTION
CAUTION
ENGLISH