34
Maintenance
E623EN_01.DOC
1
2
3
1 Die
2 Plate
(0063977)
3
Cap screw (0014400)
Fixed die arm
1. Remove the complete fixed die arm from the machine.
2. Loosen the cap screw (3).
3. Remove the plate (2).
4. Remove the die (1).
5. Install new die (be sure that the cutting segments fit closely to
the anvil, see Fig. 50444, p. 36). (Die selection see Table 5,
p. 11 and Table 6, p. 12.)
Note
Do not install the cutting segment backwards.
6. Install the plate (2).
7. Tighten screw (3) firmly.
Replace die arm
Fig. 50442
