18
Operation
E623EN_01.DOC
4. Operation
Warning
Risk of injury due to improper handling.
Make sure the machine is always in a stable position when
operating it.
Wear safety glasses, hearing protection, protective gloves
and work shoes when working at the machine.
Never touch the tool while the machine is running.
Always operate the machine away from your body.
Warning
Damage to property due to improper handling.
Machine will be damaged.
Before joining, stand the swivel arm up vertically.
Align the punch and die the same (both lengthwise or both
crosswise).
The motor shuts off with excess load.
Allow the machine to run in idle until it has cooled down.
The machine can be operated again normally after it has cooled
down.
Note
Coat the seam point with oil before machining steel, chromium
steel, and aluminum or aluminum alloys. In this way:
•
The joining quality is improved.
•
The service life of the punch is increased.
Material
Oil
Steel, chromium
steel
Punching and nibbling oil (0.5 l, order no. 103387)
Aluminum
Akamin oil (1 l, order no. 125874)
Motor overload protection
Table 8
