E623EN_01.DOC
Maintenance
35
1 Die
2 Plate
(0063977)
3
Cap screw (0014400)
Tilting arm for die
1. Pull the bracket towards the front and swivel the whole fir arm
so that the cap screw (3) can be accessed.
2. Loosen cap screw (3).
3. Remove the plate (2).
4. Remove the die (1).
5. Install new die (be sure that the cutting segments fit closely to
the anvil, see Fig. 50444, p. 36). (Die selection see Table 5,
p. 11 and Table 6, p. 12.)
Note
Do not install the cutting segment backwards.
6. Install the plate (2).
7. Tighten screw (3) firmly.
Fig. 50443
