12
Tool assembly
E464EN_04.DOC
K
K
R
R
S
Cr
K
Sharp cutting edge
on the standard blade
S Standard
blade
Cr Chromium steel blade
R
Radius 0.2 mm at the cutting
edge of the chromium steel
blade
Blade with type identification
Note
Standard blades with a tensile strength of
≤
400 N/mm² have no
special identification marking. Chromium steel blades are marked
with "Cr".
Note
For these reasons, it is highly recommended that only such tools
be used as those which correspond to the specifications contained
in this table.
Blade type
Sheet thickness
ranges
mm
Type of material
and
Tensile strength
Material No.
Standard 0.5-4.0
Aluminium
250 N/mm²
140451
Standard 0.5-3.5
Coil 0.5-3.0
Mild steel
400 N/mm²
140451
Standard 0.5-1.5
Coil 0.5-1.0
Stainless steel
600 N/mm²
140451
Standard
1
1.5-3.0
Coil 1.9-2.5
Stainless steel
600 N/mm²
140451
Cr
1.5-3.0
Stainless steel
600 N/mm²
140452
Cr 0.5-2.0
Coil 0.5-1.5
Stainless steel
800 N/mm²
140452
1
Utilisation is possible with advanced wearing
Fig. 14843
Table 3
