Trumpf KF023, Operator'S Manual

Page: 22 / 176

processing point. The laser may only be switched on if the
compact dust extractor is functioning.
Regularly check the functioning and operational safety of the
compact dust extractor and ensure sufficient ventilation of the
room.
When returning exhaust air to the room, make sure that residual
quantities of harmful substances are below the permissible limits.
Inform people who are in the room about the risks and instruct
them to be aware of hazardous situations.
4.3 Mechanical movement
Heavy focusing optics (> 20 kg)
Lifting and carrying the focusing optics can cause injuries.
Dropping or tipping the focusing optics can cause injury
and damage to property.
Ø Move the focusing optics using a suitable means of trans-
port (e.g. trolley, crane, boom lift).
Ø Persons with existing physical injuries should not lift the
focusing optics.
Ø Secure the focusing optics to prevent them from falling over
in transport.
Ø
Securely fasten the focusing optics to the carrier.
Ø Always store the focusing optics securely so that they can-
not fall.
Ø Always use two people to lift and carry the focusing optics.
Ø Keep transport routes free of obstacles
Ø
Wear suitable protective clothing (safety shoes, protective
gloves).
Focusing optics in unmounted state
If handled improperly, the focusing optics may tip over, slip
or otherwise change position when unmounted.
Dropping or tipping the focusing optics can cause injury
and damage to property.
Ø Handle the focusing optics with the necessary care when
unmounted.
Ø Wear suitable protective clothing (safety shoes, protective
gloves).
1 ‐ 10
Hazards 2022-03 12-29-01-A1-CRen
WARNING
WARNING