Trumpf KF023, Operator'S Manual

Page: 63 / 176

Plug receptacle and LLK (sealed with adhesive tape) Fig. 112314
1. Store the focusing optics such that the shaft of the plug
receptacle for the LLK is in a horizontal position.
C
T
-0
0
4
2
1
Remove the sealing plug from the plug receptacle Fig.
CT-00421
2. Remove the adhesive tape from the plug receptacle (1) of
the focusing optics.
3. Push sliding sleeve (2) towards the focusing optics until this
engages.
4. Remove the plug (3).
Remove the protective cap from the LLK plug Fig. 112315
5. Remove the adhesive tape from the LLK plug (1).
6. Remove the protective cap from the LLK plug. by turning
protective cap to the left (bayonet locking) (2) and (3).
12-29-01-A1-CRen 2022-03 Installation
2 ‐ 25