Trume TR-MB5 User Manual Download

Page: 97 / 121

Stopwatch

Trouble

Causes and Solutions

Cannot start measuring

Time adjustment (receiving GPS satellite signals) is being performed.

Wait until adjusting the time is complete, or press and release the

button to

stop receiving the signal.

The center hand stops while
measuring

If you do not operate any of the buttons within 10 minutes, the center
hand stops at 0 seconds position.

Measuring continues.

By pressing Split (

button) or stop measuring (

button) you can check the

measurement time at the time of operation.

“Using the Stopwatch” on page 65

The center hand/
measurement hand (short
hand/long hand) has
returned to 0 seconds
position

The time that can be measured has been exceeded.

“Using the Stopwatch” on page 65

MB52 (TR-MB5) User’s Guide

Troubleshooting

Summary of Contents for TR-MB5


























































































































Search results

Summary of Contents for TR-MB5

Reviews:

Related manuals for TR-MB5

Brands by name

Popular brands

Trume TR-MB5, User Manual

Search results

Summary of Contents for TR-MB5

Reviews:

Related manuals for TR-MB5

Brands by name

Popular brands