manualshive.com logo in svg

Trume TR-MB5, User Manual, Page: 14 / 121

Share
Download
Trume TR-MB5 User Manual Download Page 14

Features of the Product

Adjusting the time by receiving signals from GPS satellites (SATELLITELINK)

Your watch can automatically adjust to the correct time by receiving signals from GPS satellites.

However, you need to set Daylight Saving Time (DST) manually.

U

 

“Adjusting the time by receiving signals from GPS satellites” on page 15

Light charging feature (LIGHT CHARGE)

You can charge the watch by exposing the dial to sunlight or fluorescent light.

As it can take some time to recharge the battery after it runs out, we recommend exposing the dial to light as often as
possible.

U

 

“Charging the watch” on page 38

Altimeter/barometric feature with pressure sensor

You can measure altitude and barometric pressure using the pressure sensor built into the watch.

U

 

“Mechanism for measuring altitude” on page 73

U

 

“About barometer feature” on page 81

MB52 (TR-MB5)     User’s Guide

Before Use

14

Summary of Contents for TR-MB5


























































































































Reviews:

No comments