Trume TR-MB5 User Manual Download

Page: 75 / 121

Measuring Altitude

You can calculate the altitude of your current location using the pressure sensor built into the watch.

Important:

If the atmospheric pressure changes due to weather conditions or the temperature at the measurement location,
the measurement results and the actual altitude may differ.

Move to a location where you know the altitude, and then calibrate the altitude.

“Calibrating the Altitude” on page 78

If you do not correct the altitude, there may be a discrepancy of tens of meters or more.

Measuring

Press and release the

button several times to enter

ALT

mode

Note:

The watch automatically measures altitude approximately every 10 minutes (the indicator hand does not point to

at this time).

When you switch to

ALT

mode, the altitude measured last time is displayed. If the altitude measured last time is

negative, the small second hand points to

−

. Go to step 2 to measure the altitude of your current location in real time.

Press the

button to start measuring

While measuring (for one minute) the indicator hand points to

Note:

While measuring with the

button, the measurement results are updated every second.

MB52 (TR-MB5) User’s Guide

Altitude Measurements (ALT)

Summary of Contents for TR-MB5


























































































































Search results

Summary of Contents for TR-MB5

Reviews:

Related manuals for TR-MB5

Brands by name

Popular brands

Trume TR-MB5, User Manual

Search results

Summary of Contents for TR-MB5

Reviews:

Related manuals for TR-MB5

Brands by name

Popular brands