User Manual
5
STRUCTURE:
MAINTENANCE:
1.
If the compressor stops for any reasons like water shortage, too much ice,
power off, etc., don't restart it right away. You can restart it about 5 minutes
later.
2.
Check regularly the connectors of the water inlet and outlet tubes and drain
the little surplus water that may leak.
3.
If the ice make will be unused for a long period, please screw off the plastic
drainage connector screw on the back of the ice maker so as to drain the
surplus water in the water groove. Then screw it on. Wipe the inner liner of
the ice storage container with a clean rag.
4.
When plugging or unplugging, the plug should be held by hand and the wires
should not be dragged heavily.
1.Switch
4.Temperature Sensor
7. Power Cable
10. Foot Screw
2.Operation Board
5. Ice Shovel
8. Screw For Drainage
11. Water Inlet Tube
3. Door
6. Back Panel
9. Water Outlet Tube
12. Drainage Tube
